Welcome to our new website!
Episode 1
Temperature Monitoring: Getting the Basics Right
You can’t always see it. But it’s still a risk.
Placeholder intro — why hot and cold temperature checks so often fail an audit.
This episode covers how often they really need doing, and where remote monitoring earns its keep.
In this episode, our team explains:
Placeholder point 1.
Placeholder point 2.
Placeholder point 3.
Placeholder point 4.
Temperature monitoring sounds simple, yet it is the single most frequent gap we see in written control schemes. This episode breaks down what good looks like and where records tend to fall apart.
Sentinel outlets and run times
We explain how sentinel outlets are chosen, how long taps should run before a reading is taken, and why inconsistent method produces data nobody can defend at audit.
Where remote monitoring helps
For multi-site estates, continuous sensing removes the manual burden and gives you an auditable trail — plus alerts when temperatures drift out of range rather than a month later.
Good water hygiene isn’t achieved through one action — it’s the result of consistent management, good procedures and competent people.
Legionella Busters says:
Small actions. Big impact.
Safe water starts with good management.
Read the full episode on LinkedIn
Practical tips and expert advice from this episode.
Free legionella compliance checklist
Review whether your organisation has the key controls in place.
Risk assessments
Documentation
Temperature monitoring
Control measures
Cleaning and disinfection
Training
Water sampling
Corrective actions
What should the Legionella Busters tackle next?
We’d love to hear your suggestions. Let us know in the comments on LinkedIn.
Trusted water safety built on over 60 years of expertise.
Registered Office | 1st Floor, 11 Freeport Office Village, Century Drive, Braintree, Essex, CM77 8YG.
Registered in England and Wales | No: 05623756.